Beierplasm pen K85 Introduction of four function buttons

Beierplasm pen K85 has a total of four buttons.

Beierplasm Power button:

As long as operator press and hold for 1-2 seconds, it can start the machine.

The boot interface will present the logo.

Operator can design their pattern or design company name.

When operator want to end the treatment,

only need to press and hold for 2-3 seconds to appear "goodbye", which means shut down.

In addition, the power button is also a level adjustment button.

There are three levels: 1, 2, 3.

The operator can choose the appropriate level and the appropriate frequency for treatment.

Beierplasm pen K85

Beierplasm pen K85

Beierplasm Mode button: automatic mode, manual mode.

When operator use the automatic mode, “Auto” will appear on the screen.

In this mode of operation, operator only need to press the button once to let the machine continue to work for 25 seconds.

The operator can easily operate and focus more on the customer's skin condition.

When operator use manual mode, “Manu” will appear on the screen.

In this mode of operation, operator can treat it once per button press.

The operator can also hold down the button so that can treatment the area at any time.

Beierplasm Frequency button: 8 frequencies can be adjustabled.

10 Hz, 25 Hz, 50 Hz, 75 Hz, 100 Hz, 150 Hz, 200 Hz, 500 Hz.

This frequency can be combined with power level to achieve therapeutic accuracy.

Beierplasm Shooting spark button: This button is near the end of the Beierplasm. This light will light up when operator touch it.
Once triggered, it is possible to start treatment.

When operator are working in automatic mode, if they want to pause or stop shooting spark, only need to press the button once.

The suspending the operation while the light will not light up. Beierplasm pen K85 Comprehensive function